HP 410C Voltmeter, refurbed and tested good, no AC probe

Description

Offered here is an HP 410C Voltmeter. This unit has been sitting on the "2B repaired" shelf for nearly 20 years, and I finally got around to doing it.
It has just been refurbished and works fine on DC and Ohms.
All ranges read a tad high on the meter, so it needs its cal tweaked. The 2nd pic shows it measuring a 1k Ohm standard resistor (Ohms is bottom scale). The 3rd pic shows it measuring the 4V output of a DC calibrator (DC is top scale). So the prospective owner should plan on going through the adjustment procedures given in the manual. And first doing an intensive clean on the Function switch contacts would probably be a good idea, as well.
This unit is in very good overall condition, but is missing a couple things. As mentioned, it has no AC probe. The plastic foot that holds the tilt bale in place is missing. And the meter face has some discoloration, typical of HP meter faces from that period, but as you can see in the pics, it is quite readable.
Functional condition
: Refurbished and tested good in DC and Ohms
Cosmetic condition
:  Good
Accessories included
: none
Serving the international electronics community since 1996
Warranty
- Unless explicitly stated otherwise in the item description, all items are guaranteed for proper operation. The warranty is 14 days from receipt. It is designed to give you sufficient time to use the item and have confidence that it is working properly. It is not a try-out period; it is a return-or-replace guarantee in the unlikely event that the item arrives not working properly.
Shipping
- This item will be shipped by FedEx or UPS Ground. If you prefer a different method for shipping this item to you, please bring it to my attention and I'll work with you.